Products

PRODUCT DESCRIPTION 產品概說  

The sleeve control valve is of axial flow channel design, controlling the inner fluid of the channel moothly. Compared with other control valves, it has less noise and cavitation, and the valve’s flow coefficient Cv nd stroke are almost in linear relation, achieving the precise flow control.

套筒型(錐型)控制閥採軸流式流道設計,使流道內的流體能平順的被控制,相較於其他控制閥有更小的噪音及穴蝕現象,且閥之流量係數Cv與行程幾乎呈線性關係,以達成精確控制之目的。

According to different channel designs,the sleeve control valve can be classified to MULTI-JET CONTROL VALVE and FIXED CONE CONTROL VALVE .

套筒型(錐型)控制閥依流道設計及配置不同又可分為多噴孔控制閥及單噴孔(固定錐型)控制閥。

 proimages/SLEEVE_CONTRPL_VALVES/characteristic特性表較.jpg

 

Pressure Rating 壓力等級 Nominal Size 標稱口徑 Drive System 驅動系統
7.5K/10K/16K
125LB/300LB
PN10/PN16/PN25
150mm~2600mm 6”~104”

Hydrailic
液力(水壓或油壓)

Pneumatic
氣壓

Electric Actuator
電動驅動機

 




 

2 products in this product line
產 品 相 關 尺 寸 如果..

如果您需要其它特殊的功能設計,可下載..

PRODUCT APPLICATIONS 產品功能概要
The model of control valve
控制閥型式
Control system
控制系統
Description
主要功能說明
SSH-RL
Fixed Cone pressure relief valve
SSH-RL固定錐型持(洩)壓閥
●操作機:(四選一)
 水壓缸 / 油壓缸 /氣油壓缸 / 電動操作機
●現場控制箱
  控制系統: (配合設計功能)
●壓力偵測模組
  電磁閥組
  PLC可程式控制器
●Actuator(one of four options)
  water cylinder . oil cylinder
  pneumatic w/oil cylinder
  motor actuator
●remote control box
●Control system
  Pressure sensor mode
  Solenoid model
  PLC
維持上游管線系統於設定壓力之下。當
控制閥上游壓力大於設定壓力時,錐型
閘自動增加套筒開度並維持調節狀態。
In order to maintain the upstream pipeline
system under the setting index of pressure,
when the valve’ pressure is higher than the
setting index , the valve will open to
release the pressure automatically.
SSR-RD
Fixed Cone pressure reducing valve
SME-RD
Multi-Jet pressure reducing valve
SSH-RD固定錐型減壓閥
SME-RD多噴孔型減壓閥
●操作機: (四選一)
  水壓缸/油壓缸/氣油壓缸/電動操作機
●現場控制箱
●控制系統: (配合設計功能)
  減壓響導閥
  電磁閥組
  PLC可程式控制器
●Actuator(one of four options)
  water cylinder . oil cylinder
  pneumatic w/oil cylinder
  motor actuator
●remote control box
●Control system
  Pressure sensor mode
  Solenoid model
  PLC
維持下游管線系統於設定壓力之下,當
控制閥下游壓力大於設定壓力時,錐型
閘自動減少套筒開度並維持調節狀態。
In order to maintain the downstream
pipeline system under the setting index
of pressure , when the valve’ pressure
is out of the setting index , the valve
will regulate the pressure
automatically.
 SSH-FW
Fixed Cone valveRate of flow valve
SME-FW
Multi-Jet valveRate of flow valve
SSH-FW固定錐型流量控制閥
SME-FW多噴孔型流量控制閥
●操作機:(四選一)
 水壓缸/油壓缸/氣油壓缸/電動操作機
●現場控制箱
●控制系統: (配合設計功能)
  流量響導閥
  電磁閥組
  PLC可程式控制器
●流量偵測器
●Actuator(one of four options)
  water cylinder . oil cylinder
  pneumatic w/oil cylinder
  motor actuator
●remote control box
●Control system
  Pressure sensor mode
  Solenoid model
  PLC
●Flow sensor

在設定的壓力範圍內控制管線流量於設
定範圍之內。當流量低於或高於設定值
時,錐型閘自動增加或減少套筒開度並
維持調節狀態。
Control the rate of flow in setting index
range,when it is out of the index range ,
the valve will regulate to setting index
automatically.
Remark 備註
1.The extra water pressure supply is required as the hydraulic cylinder working pressure from pipeline is
   under 1kgf/cm2.
  水力操作(水壓缸)系統因採用管線自有水壓,因此工作壓力至少需達 1 kgf/cm2,否則須另提供外部水壓來源
2.The pressure class and flange specification are customized.
  其它壓力等級及法蘭規格可另行設計